How to Install and Style Greedy Cat Keycaps

By Lofree | Fun 2㎡ Designer for Mechanical Keyboard | Published: 2026-10-30

Category: How-to Guides

Learn step-by-step how to install Greedy Cat keycaps on your mechanical keyboard, check compatibility, and style them for a playful look.

Quick answer

To install Greedy Cat keycaps, first check compatibility with your mechanical keyboard's switch type and layout, then carefully remove old keycaps and press the new ones on. Choose the right number of keys for your board and enjoy the playful cat-and-snack design.

Compatibility checks before you start

Greedy Cat keycaps are designed for mechanical keyboards, but not all boards are the same. The most important check is the switch type: most mechanical keyboards use Cherry MX-compatible stems, but some low-profile or proprietary switches may not fit. Also, verify the layout of your keyboard—especially the bottom row—because some boards have non-standard sizes for keys like Spacebar or Alt.

Another consideration is the keycap profile. Greedy Cat keycaps have a specific profile that affects height and shape, which can change the feel and sound of typing. If you are mixing them with other keycap sets, test a few keys first to ensure they align well.

Finally, decide how many keys you need. Greedy Cat keycaps come in different set sizes, so knowing your keyboard's key count helps you pick the right option. For example, a TKL board needs fewer keys than a full-size board.

Step-by-step installation guide

Check compatibility: Ensure your keyboard uses Cherry MX-compatible switches and that the keycap set size matches your keyboard layout. If unsure, consult your keyboard's manual or the product description. Common mistake: assuming all keycaps fit all mechanical keyboards. Low-profile or proprietary switches may not be compatible.
Gather tools: Use a keycap puller (wire or ring type) to avoid damaging keycaps or switches. If you don't have one, you can gently use your fingers, but be careful. Checkpoint: A wire puller is gentler and less likely to scratch keycaps than a ring puller.
Remove old keycaps: Place the puller over the keycap, press down, and pull straight up. Work slowly and evenly to avoid bending the switch stem. Common mistake: pulling at an angle can damage the switch. Always pull vertically.
Align the new keycap: Orient the keycap so the legend (if any) faces you. For larger keys like Spacebar, check the stabilizer alignment before pressing down. Checkpoint: For stabilizer keys, ensure the wire is seated properly to avoid uneven pressing.
Press firmly: Press the keycap down until it clicks into place. Apply even pressure and avoid rocking the keycap side to side. Common mistake: pressing too hard or at an angle can break the switch stem. Use moderate, even pressure.
Test all keys: Type on each key to ensure it registers correctly and feels consistent. If any key feels loose or doesn't respond, reseat it. Checkpoint: Test all keys before finalizing your setup to catch any issues early.
Style your keyboard: Arrange the Greedy Cat keycaps to create a fun pattern—mix them with your existing keycaps or use them as accents. The yellow and green color scheme pairs well with neutral or dark boards. Common mistake: overloading the board with too many themed keycaps can make it hard to find keys. Use them as accents for a balanced look.

Product facts

Greedy Cat: Greedy Cat keycaps feature cut cats paired with favorite snacks like burgers, soda, candy, and cookies, with a lively yellow and green color scheme. These playful designs add a fun, vibrant look to your keyboard, making each keystroke more enjoyable.
Greedy Cat