Wavy Chips Bluetooth Mouse Setup Guide

By Lofree | Fun 2㎡ Designer for Mechanical Keyboard | Published: 2026-10-29

Category: How-to Guides

Learn how to pair, configure, and optimize your Lofree EP115 Wavy Chips Bluetooth Mouse for a smooth, ergonomic workflow in your 2m² workspace.

Quick answer

To set up your Lofree EP115 Wavy Chips Bluetooth Mouse, charge it fully, enable Bluetooth on your device, press the pairing button on the mouse, and select it from your device's Bluetooth menu.

Why the Wavy Chips design matters for setup

The Lofree EP115's wavy potato chip-shaped buttons aren't just a visual quirk — they influence how you position your hand during setup. Because the buttons curve, you may need to adjust your grip to press the pairing button comfortably. This design aims to reduce wrist strain, so take a moment to find a natural hand angle before starting the pairing process.

Troubleshooting common pairing issues

If your device doesn't detect the mouse after pressing the pairing button, the most likely cause is interference from other wireless devices. Move the mouse closer to your computer (within 3 feet) and turn off nearby Bluetooth speakers or keyboards temporarily. Also, ensure the mouse battery is fully charged — a low battery can prevent the Bluetooth radio from activating.

Step-by-step setup guide

Charge the mouse fully: Connect the included USB charging cable to the mouse and a power source. Charge until the indicator light turns solid (typically 1–2 hours). A low battery can cause intermittent disconnection. Always charge before first use to avoid pairing failures.
Enable Bluetooth on your device: Open your computer or tablet's Bluetooth settings and turn Bluetooth on. For Windows, go to Settings > Bluetooth & devices; for macOS, open System Preferences > Bluetooth. Make sure Bluetooth is active before pressing the mouse button.
Press the pairing button on the mouse: Locate the small pairing button on the underside of the mouse. Press and hold it for 3 seconds until the LED starts blinking rapidly. This indicates the mouse is discoverable. If the LED doesn't blink, the battery may be low — recharge and try again.
Select the mouse from your device's Bluetooth menu: In your device's Bluetooth list, look for 'Lofree EP115' or 'Wavy Chips Mouse'. Click 'Pair' or 'Connect'. Once paired, the LED will stop blinking and remain solid. If the mouse doesn't appear, move it closer to your device and repeat step 3.
Adjust pointer speed and button preferences: Open your system's mouse settings to adjust tracking speed and button functions. For the Wavy Chips design, a medium speed often feels most natural due to the curved button shape. Test different speeds for 5 minutes each to find your comfort zone.

Product facts

Wavy Chips Bluetooth Mouse: The Lofree EP115 Bluetooth Mouse offers two color options (blue and white) and is designed for a 2m² workspace. Choosing a color that contrasts with your desk surface makes the mouse easier to spot, which helps when you need to press the pairing button or check the charging status.
Wavy Chips Bluetooth Mouse