1% Misty & Pulse Switch Build Guide
By Lofree | Fun 2㎡ Designer for Mechanical Keyboard | Published: 2026-10-20
Category: How-to Guides
Learn how to combine the Lofree 1% Misty keyboard with Pulse low-profile switches for a custom build. Step-by-step instructions for a smooth assembly.
Quick Answer
Pair the Lofree 1% Misty Mechanical Keyboard with Pulse Low-profile POM Switches for a quiet, smooth typing experience. This guide walks you through each step of the build.
Why This Combination Works
The 1% Misty's frosted housing and white backlighting create a clean, diffused look that pairs well with the smooth, consistent feel of POM switches. The Misty already includes hot-swap sockets and poron silencing, so adding Pulse switches is a direct upgrade without soldering.
What You'll Need
Your Lofree 1% Misty keyboard, a set of Pulse Low-profile POM Switches (106 switches included for full-size coverage), and a keycap puller (included with the keyboard). A flat workspace and good lighting help avoid mistakes.
Step-by-Step Build Process
- Remove the Original Keycaps: Use the keycap puller to gently lift each keycap from the 1% Misty. Store them in a safe place. Common mistake: pulling at an angle can bend the switch stem. Pull straight up to avoid stem damage.
- Extract the Stock Switches: Grip the switch from the top and bottom with the switch puller, squeeze, and pull straight out. The hot-swap sockets on the Misty require minimal force. Common mistake: pulling from the sides can damage the socket. Apply even pressure from top and bottom only.
- Insert the Pulse Switches: Align the two metal pins on the Pulse switch with the socket holes and press down firmly until you hear a click. The switch should sit flush with the plate. Common mistake: bending the pins by forcing the switch in at an angle. Check pin alignment before pressing down.
- Test the Switches Before Reassembling: Plug the keyboard into your computer and press each new switch to confirm it registers. This step saves you from having to redo the work later. Common mistake: skipping this step and finding a dead switch after reassembly. Test all switches before putting keycaps back on.
- Reattach the Keycaps: Press each keycap back onto the switch stem until it snaps into place. Ensure the keycap orientation matches the layout (e.g., spacebar stabilizer bars). Common mistake: forcing a keycap onto a misaligned stem can crack the stem. Align the keycap cross with the stem before pressing.
Components for Your Build
- 1% Misty Mechanical Keyboard: The 1% Misty features a fully frosted white keycap set and chassis, upgraded hot-swap sockets, and a poron silencing pad. This means you can swap switches without soldering and enjoy a quieter typing experience right out of the box.
1% Misty Mechanical Keyboard - Pulse Low-profile POM Switches: The Pulse Low-profile POM Switches are made from POM material, known for a smooth and consistent feel, and include 106 switches. POM's self-lubricating properties reduce friction, giving you a smooth keystroke without needing to apply additional lubricant.
Pulse Low-profile POM Switches
