How to Set Up the Return Mechanical Keyboard for Typing

Quick answer

Unbox your Return keyboard, charge it fully, then connect via Bluetooth, 2.4G, or USB-C. Adjust the angle and test each key to ensure everything works before your first typing session.

Return keyboard setup steps

1. Unbox and inspect: Remove the keyboard, cable, and any included accessories. Check for visible damage or missing parts. Place the keyboard on a flat, clean surface. Keep the original box and foam in case you need to return or store the keyboard later.
2. Charge the battery: Use the included USB-C cable to connect the keyboard to a power source. Let it charge for at least 2 hours before first use. The LED indicator will show charging status. Do not use the keyboard while charging — it may interfere with the battery calibration.
3. Choose your connection method: For Bluetooth: turn on the keyboard, press and hold the Bluetooth button until the LED blinks, then select 'Return' in your device's Bluetooth menu. For 2.4G: plug the included dongle into your computer and turn on the keyboard. For USB-C: connect the cable directly to your computer. Bluetooth pairing may fail if the keyboard is too far from the device — keep them within 3 feet during pairing.
4. Test all keys and switches: Open a text editor and type each letter, number, and modifier key. Press every key a few times to ensure consistent registration. Listen for any rattling or sticking sounds. If a key feels stiff or unresponsive, check for debris under the keycap before contacting support.
5. Adjust typing angle and position: Flip out the built-in feet to raise the keyboard to your preferred angle. Position the keyboard so your wrists are straight and your elbows are at 90 degrees while typing. A flat keyboard without feet may cause wrist strain during long sessions — use the feet for a more ergonomic angle.
6. Configure OS keyboard settings (optional): On Windows, go to Settings > Devices > Typing and adjust key repeat delay and rate. On macOS, go to System Settings > Keyboard and set modifier keys if needed. On mobile, enable the keyboard in Bluetooth settings. The Return keyboard uses a standard layout, so no special driver is required — but customizing repeat speed can improve your typing flow.

Product fact

• Return Mechanical Keyboard: The Return connects using 2.4G, USB-C, or Bluetooth 5.3 and works with laptops, tablets, and smartphones. You can choose the connection method that best fits your workflow — Bluetooth for clutter-free desks, 2.4G for low-latency gaming, or USB-C for a wired backup.